Power cord:
Lite series and professional miners will come with a power cord as well as the PSU.
The power cord we send you has a type i plug and IEC C19 power connector.
If the power cord provided with the miner doesn't match your local socket, you can opt to purchase an adapter or a power cord that meets the specifications (C19 connector;16A/250V 2.5mm²).
- 16A indicates a current carrying capacity of 16 Amperes, capable of handling a maximum current of 16 Amperes.
- 250V indicates a voltage rating of 250 Volts, suitable for environments with a maximum voltage of 250 Volts.
- 2.5mm² indicates a wire cross-sectional area of 2.5 square millimeters, indicating the wire's conductivity and load-bearing capacity.
Please note: Using a different power cord may impact troubleshooting any potential issues later on.
Adapter:
You can check the picture below and find out what types of plug adapter you need to get.
Transformer/Voltage converter
- Click here to check the voltage information worldwide.
- Click here to look up the voltage range of the miners.
- If local voltage doesn't meet the input voltage standard of the miner, you’ll need to pair it with a voltage converter or transformer.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article