We highly recommend using Goldshell customized PSU.
If you choose to use a non-Goldshell power supply, please ensure the following requirements are met:
- Wire Gauge: The wire must be 16AWG. Using 18AWG wire may cause overheating and connector damage, which can risk product damage and will be at your own risk.
- Power Rating: The rated power of the power supply multiplied by 80% should be greater than or equal to the miner's power consumption.
- Connectors: Multiple independent 2x3 PIN power connectors with 12V output.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article