To upgrade the firmware on the uGW800, follow these steps:
- Enter the machine's backend through the IP address.
- Click on the "Gear" button and select "Settings".
- Find "System" and locate "Upgrade".
- For upgrading method one, select "Auto". The machine will automatically upgrade. Once you select "Auto", the machine will automatically check the firmware version every 12 hours.
- For upgrading method two, click "Check". If your current firmware version is not up-to-date, the "Check" button will change to "Upgrade". Click "Upgrade" to initiate the upgrade process. If the "Check" button doesn't change, then your firmware version is already up-to-date.
Tips: Clicking "Check" will display the firmware and miner versions. "firmware" and "miner" are totally different here. If "same" appears behind the "miner: 2023...", it means your firmware is already up-to-date, even though the "latest firmware" is different from the "miner".
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article